嵌补式网格技术在三维增升装置绕流数值模拟中的应用

基于Jameson的有限体积方法，采用多块网格技术求解Reynolds平均N－S方程组，对三维增升装置绕流进行数值模拟。提出了新颖的嵌补式多块网格技术，使得网格生成和流场计算得到了明显的简化。计算结果与实验数据吻合良好。     

Critical wake vortex encounter scenarios

A simulation-based method was developed to investigate the severity of Wake Vortex Encounters (WVEs). This paper describes an important part of this method: the determination of worst-case WVE conditions, which is referred to as Worst-Case Search (WCS). The WCS results permit to reduce time and costs of WVE severity related piloted simulator tests and allow the comparison of the hazard that vortices of different generator aircraft exert on a follower aircraft.The WCS is based on a high fidelity, offline simulation of the follower aircraft that includes the interacting wake vortex, a hazard criterion that rates the severity of each WVE, and a pilot model. It can be formulated as an optimisation problem that is solved with the optimisation tool MOPS (Multi Objective Parameter Synthesis). MOPS varies the encounter geometry until the simulation yields maximum values of the WVE hazard criterion.Worst-case encounter conditions for different parameters were investigated and sensitivity studies performed. The influence of the height above ground, the core radius, and the models for the wake vortex velocity profiles on the severity of a WVE was examined. To show the capability of the method, a comparison of the severity of a WVE behind two different heavy transport aircraft for a 20 t aircraft was made. The WCS method demonstrated its applicability and delivered the worst-case encounter geometry.

Zusammenfassung

Zur Untersuchung der Heftigkeit von Wirbelschleppen wurde eine simulationsbasierte Methode entwickelt. Dieser Beitrag beschreibt einen wichtigen Bestandteil dieser Methode: die Bestimmung der ungünstigsten (worst case) Einflugbedingungen in die Wirbelschleppe. Die Kenntnis dieser Bedingungen gestattet eine Zeit- und Kostenreduzierung bei wirbelschleppenbezogenen Simulatorversuchen mit Piloten und ermöglicht gleichzeitig einen Vergleich der vom Wirbel ausgehgehenden Gefährdung für verschiedene Kombinationen voraus- und einfliegender Flugzeuge.Die Worst-Case-Bedingungen werden mit einer Offline-Simulation des Folgeflugzeugs bestimmt, die Modelle für die Wechselwirkung mit der Wirbelschleppe und für das Pilotenverhalten sowie Kriterien für die Gefährdung durch den Wirbel umfasst. Für die Steuerung der Simulation und die Worst-Case-Suche wird die Optimierungssoftware MOPS (Multi Objective Parameter Synthesis) verwendet. MOPS variiert die Geometrie des Wirbelschleppendurchflugs bis die Simulation die maximalen Kriterienwerte für die Gefährdung durch den Wirbel liefert.Die Worst-Case-Bedingungen wurden für unterschiedliche Parameter untersucht. Der Einfluss der Höhe über Grund, des Kernradius' und der unterschiedlichen Modelle für das Wirbelgeschwindigkeitsprofil auf die von den Wirbelschleppen ausgehenden Gefährdung wurde dabei ermittelt. Um die Leistungsfähigkeit der Methode zu demonstrieren, wurde die Gefährdung von Wirbelschleppen zweier generierender Flugzeuge (heavy class) auf ein nachfolgendes 20 t Transportflugzeug verglichen. Die Anwendbarkeit der Methode wurde bestätigt und die ungünstigsten Einflugbedingungen berechnet.     

六自由度激励台精密高刚度铰链结构设计与试验应用

精密高刚度铰链作为六自由度并联激励平台中的关键组件,其性能高低对激励台的控制精度有直接影响。针对铰链所需满足的高刚度、高基频和无间隙等要求,文章提出了基于虎克铰结构的铰链设计方法。首先根据铰链所处的工况确定选用圆锥滚子轴承作为旋转支撑部件,并通过对轴承的配置和预紧实现无间隙振动运动的要求,从而确定了铰链结构形式。然后,利用有限元法校核了结构的刚度与基频,进而完成铰链结构方案和样机制造,并将样机集成于激励台中。最后,开展了铰链动态特性试验和激励台振动控制试验,分别获取了铰链的基频和激励台控制响应。结果表明,铰链可满足激励台工作频段内的使用要求,铰链设计合理。     

A comparative study of ionospheric IRIEup and ISP assimilative models during some intense and severe geomagnetic storms

Three-dimensional (3-D) electron density matrices, computed in the Mediterranean area by the IRI climatological model and IRIEup and ISP nowcasting models, during some intense and severe geomagnetic-ionospheric storms, were ingested by the ray tracing software tool IONORT, to synthesize quasi-vertical ionograms. IRIEup model was run in different operational modes: (1) assimilating validated autoscaled electron density profiles only from a limited area which, in our case, is the Mediterranean sector (IRIEup_re(V) mode); (2) assimilating electron density profiles from a larger region including several stations spread across Europe: (a) without taking care of validating the autoscaled data in the assimilation process (IRIEup(NV)); (b) validating carefully the autoscaled electron density profiles before their assimilation (IRIEup(V)).The comparative analysis was carried out comparing IRI, IRIEup_re(V), ISP, IRIEup(NV), and IRIEup(V) foF2 synthesized values, with corresponding foF2 measurements autoscaled by ARTIST, and then validated, at the truth sites of Roquetes (40.80°N, 0.50°E, Spain), San Vito (40.60°N, 17.80°E, Italy), Athens (38.00°N, 23.50°E, Greece), and Nicosia, (35.03°N, 33.16°E, Cyprus). The outcomes demonstrate that: (1) IRIEup_re(V), performs better than ISP in the western Mediterranean (around Roquetes); (2) ISP performs slightly better than IRIEup_re(V) in the central part of Mediterranean (around Athens and San Vito); (3) ISP performance is better than the IRIEup_re(V) one in the eastern Mediterranean (around Nicosia); (4) IRIEup(NV) performance is worse than the IRIEup(V) one; (5) in the central Mediterranean area, IRIEup(V) performance is better than the IRIEup_re(V) one, and it is practically the same for the western and eastern sectors.Concerning the overall performance, nowcasting models proved to be considerably more reliable than the climatological IRI model to represent the ionosphere behaviour during geomagnetic-ionospheric storm conditions; ISP and IRIEup(V) provided the best performance, but neither of them has clearly prevailed over the other one.     

Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

三维并联式TBCC发动机排气系统设计与实验

为实现三维并联式TBCC排气系统的设计,利用基于二维最大推力理论的密切法设计了圆转矩变截面非对称冲压发动机喷管,并在冲压发动机喷管上壁面为三维曲面的条件下,利用转动加滑动共用面的调节方式实现了涡喷发动机喷管的内型面设计及其喉道面积的调节,从而完成了排气系统设计。随后对设计结果进行了冷流实验验证。结果表明,这种排气系统设计方法具有可行性。在冲压单独工作状态,壁面压力分布的数值计算与实验结果吻合较好,相对方均根偏差低于10.8%;在涡喷单独工作状态及共同工作状态,上壁面压力在激波附面层干扰区域内偏差较大,最大相对偏差可达30.6%。但壁面压力分布的数值计算与实验结果的整体变化趋势一致。      

钛合金TB6铣削加工硬化实验

研究了使用涂层硬质合金刀具对钛合金TB6进行端铣加工时,铣削参数以及刀具后刀面磨损量对加工硬化（表面硬化率、硬化层深度以及硬化层硬度分布）的影响,以弄清TB6铣削硬化现象及机理.结果表明,在实验参数范围内,刀具无磨损的情况下,硬化率基本保持在107%~112%范围内,硬化层深度范围为18~36 μm;铣削速度增加时,加工硬化程度会有较为明显的降低现象,而进给量与切深对加工硬化的影响并不明显;刀具磨损对加工硬化的影响较为显著,后刀面磨损量低于0.2 mm时,硬化层深度随着磨损增加从30 μm增加至55 μm,而后刀面磨损量为0.35 mm时,硬化层深度达到了130 μm.刀具磨损后在加工表面下较浅位置出现软化区域,而且随着磨损量的增加,软化越来越明显.      

昆虫级褶皱翼型的滑翔气动特性

为了研究褶皱翼型上、下表面分别对气动力的影响,在弦长雷诺数为1200,攻角为0°~20°时,采用有限体积法研究了褶皱翼型、光滑翼型、上表面光滑的褶皱翼型和下表面光滑的褶皱翼型的滑翔气动特性.结果表明:在一定攻角范围内,褶皱翼型的升力系数较光滑翼型提高了10%;只要翼型下表面是褶皱的,产生的升力总大于下表面是光滑的,下表面褶皱对升力的提高具有更大作用;在大攻角下,光滑的上表面更有利于提高升力;在任何攻角时,上、下表面褶皱对阻力影响很小.      

BVR空战仿真中具有分层学习能力的CGF实体行为仿真框架设计

针对超视距协同空战仿真是一个复杂系统的仿真特点,通过对预警机指挥引导下的多机协同空战过程的分析,建立了超视距多机协同空战行为功能框架,总结出多机协同空战过程中的影响因素。在分析了现有各种CGF系统体系结构及行为仿真框架基础上,结合超视距空战过程中各作战阶段的特点,建立了具有分层学习能力的编队协同空战自主兵力系统FCAF(Formation and Cooperative Air Combat Autonomous Force System,编队协同空战自主兵力系统)行为仿真框架,并给出了该行为仿真框架组成模块的形式化描述。仿真系统应用表明,在该框架中作战行为可以分解为一系列具有经验学习功能的行为基,并且各行为基可以重新组合,全面诠释了协同作战行为仿真的作战过程。     

叶片全三维反问题优化设计方法

基于数值求解Navier-Stokes方程,对叶轮机械叶片全三维反问题优化设计方法进行研究.反问题给定叶片表面的静压分布反求叶型,假设叶表网格点有虚拟移动速度,迭代过程中根据叶表的实际静压和目标静压之差来修改叶型.对单排叶栅进行了反问题设计,并给出了初步的优化算例,结果能很好地满足目标静压分布,验证了该方法的有效性,计算的时间和精度也适合进行工程应用.